Ersättare till ITT Marlow J200/250, 48F, 2.0hk, 2 växlar

Artikelnr: 101282

8545,00 kr (Exkl moms 6836,00 kr)

Delbetalning från 344,00 kr/månad

Tillgänglig som restorder, leveranstid ca 6-8 arbetsdagar

Artikelnr: 101282 Kategorier: , Taggar: , , ,


ITT Marlow J200/250 Spa Pump- 2 Speed Replacement 2.00Hp – 1.50″ Suction

The J250 pump was commonly fitted to Spaform Spas. This pump is now discontinued parts are not readily available, especially the body O-ring which is prone to failure due to wet end deformation.

This pump is the best replacement for the J200/250 and is supplied with the wet end located the correct way. We also supply you with the same pump unions that would be used on your current pump. Once fitted you will see how the connection points locate almost into exactly where you old pump would have.

The replacement pump option will give you the closest fit possible and is the best solution for failed J250/200 units. You may find that the only adjustment needed to complete the job is a small height increase of this pump as it sits lower, this is fairly easy with a small wooden block. All in all this is far easier than trying to fit a different aftermarket pump and altering the plumbing to fit it.

The J200/250 replacement pumps are supplied without a cable. We recommend re-using the cable from your old pump to ensure correct fitment to your spa pack.

Top Tip: 1.5″, 2.0″ & 2.5″ union connection sizes are just terms coined by the hot tub industry, the actual outside diameter of a pump connection is as follows.

  • 1.5″ pump connections have an outside diameter of approximately 63mm.
  • 2.0″ pump connections have an outside diameter of approximately 79mm.
  • 2.5″ pump connections have an outside diameter of approximately 92mm.

Mer information

Vikt20.0 kg
Dimensioner50 × 30 × 30 cm

Frågor om produkten?